Patch Cracks in a Concrete Driveway or Walkway
Category: Concrete ·
Difficulty: Beginner ·
Time: 1.6h ·
Estimated cost: $30
Tools needed
- Wire brush
- Shop vacuum or leaf blower
- Caulk gun
- Putty knife
- Garden hose
- Dust mask
Materials needed
- Self-leveling concrete crack sealant (2 tube)
- Foam backer rod (1/2") (10 lin ft)
- Concrete patch compound (for wide cracks) (1 tub)
Execution steps
Read the crack before you fill it
Hairline to 1/2 inch wide, both sides level with each other = a patch job. One side heaved higher than the other, a crack that keeps growing, or a pattern of cracks spidering across the slab = the ground or the slab is moving, and filler will not fix that. Patch the first kind. Get the second kind looked at.
Duration: 10 min
Clean the crack out completely
Wire-brush the crack walls, then blow or vacuum every bit of dirt, gravel, and old filler out. Sealant bonds to clean concrete — a dusty crack lets go within a year. The crack must be dry, too.
Duration: 20 min
Press in backer rod on deep cracks
For cracks deeper than about 1/2 inch, press foam backer rod in so it sits about 1/4 inch below the surface. The sealant only needs to bridge the top — filling a deep crack solid wastes sealant and makes it split as the slab moves.
Duration: 10 min
Fill narrow cracks with self-leveling sealant
For cracks up to about 1/2 inch wide on flat ground: cut the tip to match the crack width and gun the self-leveling sealant in slowly. It flows flat on its own — do not tool it, and do not overfill. Slightly below the surface is right; a bead sitting proud gets peeled up by tires and feet.
Duration: 20 min
Patch wide cracks with compound, in layers
For cracks wider than 1/2 inch: dampen the crack, press patch compound in with the putty knife, and build it up in layers no thicker than the tub directs. One deep fill shrinks and cracks; thin layers cure hard. Feather the top layer flush with the slab.
Duration: 30 min
Let it cure and keep traffic off
Follow the tube or tub for cure time before tires cross it — usually at least a day for sealant, longer for patch compound. A repair driven on too early has to be dug out and redone.
Duration: 5 min
Safety first
- GOOD — Clean and dry is the whole job. Sealant in a clean, dry crack lasts for years; sealant over dirt fails by the next season.
- GOOD — Wear the dust mask when you brush and blow out cracks. Old concrete dust is not something you want in your lungs.
- BAD — Fill a heaved, offset crack flush and call it fixed. The trip edge is still there under the filler, and whatever is moving the slab is still moving it.
- BAD — Use interior caulk or asphalt filler because it's already in the garage. It isn't made for concrete movement or sun — it peels, stains, and has to come back out.
- HOLY SHIT — A slab that suddenly heaves, a crack that opens in days instead of years, or the smell of sewage near a crack can mean a broken water or sewer line washing the ground out from under the concrete. Stop patching and find the leak — the next thing that gives is the slab, possibly with someone standing on it.
When to hire a pro
Slabs with one side lifted (a trip edge over about 1/2 inch), cracks that keep reopening after patching, large settled sections, or any crack near a gas or sewer line — that needs a concrete pro, and possibly a plumber, before any patching.
Back to all DIY Guides ·
AyX Estimator — Take the guess out of construction.
AyX — Accuracy Yields Xcellence.